Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 724 (Page 1 of 2)
MMC: 724 DIAL NUMBERING PLAN
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
The system comes with a range of acceptable numbering plans set as default. This MMC allows
the system installer to customise feature codes and dialling plans. An error message is also pro-
vided in case an access/feature code is duplicated.
The following options can be selected. (N/A=not applicable.)
Dial
Option Description
DCS/CII 816 408/408i
STN DIAL NO. Determines the station port dialling numbers
0 0 0
TRK DIAL NO. Determines the trunk port dialling numbers
1 1 1
AA/VD DIAL NO.
(816=AA DIAL
NO.)
Determines the auto attendant/voice dialler
port dialling numbers
2 2 N/A
MISC DIAL NO. Determines the miscellaneous port dialling
numbers (e.g. MOH)
3 3 2
STNG DIAL NO. Determines the station group dialling num-
bers
4 4 3
TRKG DIAL NO. Determines the trunk group dialling num-
bers
5 5 4
FEAT DIAL NO. Determines the feature codes
6 6 5
S0 STN DIAL NO. Determines the S0 station dialling number
7 7 6*
DECT STN DIAL
NO.
Determines the DECT station dialling num-
bers
8 N/A N/A
* 408i systems only
If changing feature codes using the FEAT DIAL NO option, you can use the UP and DOWN keys
to scroll through selectable features. Features can also be entered via the dial keypad. For ex-
ample, for OHVA, the number 6 would be pressed three times. If Block Code is required, press 2
twice for BARGE and then use the UP key to select BLOCK. The example shown below de-
scribes the use of this option.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry