Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 700 (Page 1 of 1)
MMC: 700 COPY COS CONTENTS
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows you to copy a selected class of service (COS) to another COS. This is useful, for example,
if you want to create a similar COS to that being copied but want to change a few selected op-
tions within that COS. This MMC allows you to enter MMC 701, Assign COS Contents, in order to
make any changes you require. If you want to create a completely new COS, use MMC 701.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
“F” Key #24 (24B keyset) or key #12 (12B keyset) or key #6 (6B keyset)
is used to advance to MMC 701
ACTION DISPLAY
1. Open programming and select 700
Display shows
COPY COS ITEMS
COS 01→COS 01
2. Dial selected COS to copy (e.g., 05)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor and advance to next
step
COPY COS ITEMS
COS 05→COS 01
3. Dial target COS (e.g., 06)
OR
Press UP or DOWN key to select COS and press
RIGHT soft key to move cursor back to step 2
COPY COS ITEMS
COS 05→COS 06
4. To make changes to COS options, press “F” key
to advance to MMC 701 (Assign COS Contents)
OR
Go to step 5 if no changes are required
COS CONTENTS(06)
TOLL LEVEL:A
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 701 Assign COS Contents