Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 111 (Page 1 of 1)
MMC: 111 KEYSET RING TONE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system administrator to select the ring tone heard at each keyset. There are eight (1–
8) ring tones available. A short tone burst of the selection will be heard when a key is pressed.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 111
Display shows
[2
01] RING TONE
SELECTION 5
2. Dial keyset number (e.g., 205)
OR
[205] RING TONE
SELECTION 5
Press UP or DOWN to select station and press
RIGHT soft key to move cursor
OR
Press ANS/RLS to select All
[ALL] RING TONE
SELECTION ?
3. Dial 1–8 to select ring tone
OR
[205] RING TONE
SELECTION 6
Press UP or DOWN to select ring tone and press
RIGHT soft key to move cursor
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: SELECTION 5
Related Items: MMC 114 Station Volume