Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 701 (Page 1 of 7)
MMC: 701 ASSIGN COS CONTENTS
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
MMC 701 is used to create a new class of service (COS). If you want to make a copy of an exist-
ing COS, use MMC 700. If an ‘unsupervised conference’ feature is allowed, a programmed
CONF key must be available to allow reentry into a conference call.
For an overview of toll restriction (call barring), refer to Part 3 of this manual ( "Special Appli-
cations").
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
TOLL LEVEL OPTIONS
DIAL DIGIT TOLL LEVEL
0 A
1 B
2 C
3 D
4 E
5 F
6 G
7 H
ACTION DISPLAY
1. Open programming and select 701
Display shows
COS CONTENTS(0
1)
TOLL LEVEL:A
2. Dial COS (e.g., 06)
OR
Press UP or DOWN key to select COS and press RIGHT
soft key to move cursor
COS CONTENTS(0
6)
TOLL LEVEL:A
3. Dial toll level (e.g. 2)
OR
Press UP or DOWN key to select option
COS CONTENTS(0
6)
TOLL LEVEL:C
4. Press RIGHT soft key to advance to COS options
Use tables and data below to set options
COS CONTENTS(0
6)
000:AA CALER:YES
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC