Samsung DCS-408I Telephone User Manual


 
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 105 (Page 1 of 2)
MMC: 105 STATION SPEED DIAL
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system administrator to program personal speed dial numbers for stations. This may
be particularly useful for single line telephones which are more difficult to program by the station
user. Each station can have up to five blocks of speed dialseach containing 10 numbers (giv-
ing a total of 50 numbers)assigned to it in MMC 606, Assign Speed Block. By default, each sta-
tion has one block (for 10 numbers) assigned.
Speed dials are numbered 0049. Each speed dial may contain a trunk or trunk group access
code (e.g. 9) followed by a separator () and up to 24 digits to be dialled. These dialled digits
can be 09, [ and #. If the system recognises a valid trunk or trunk group access number, it will
automatically insert the separator.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“B” Used to insert a flash code “F”
”C” Used to insert a pause code “P”
”D” Used to insert a pulse/tone conversion code “C”
”E” Used to mask/unmask following digits (shows as “[“ or “]”)
”F” Used to enter name for speed dial bin (see MMC 106)
Keys “A” to “F” are keys #19 to #24 on 24B keysets, or keys #7 to #12 on 12B keysets, or keys
#1 to #6 on 6B keysets.
ACTION DISPLAY
1. Open programming and select 105
Display shows
[2
01] SPEED DIAL
00 :
2. Dial station number (e.g. 205)
OR
[205] SPEED DIAL
0
0 :
Press UP or DOWN to select station and press RIGHT
soft key to move cursor
If selected station has no speed dial blocks assigned,
the display will be as shown and a new station may be
[205] SPEED DIAL
NO SPEED BLOCK
selected.
3. Enter speed dial number (e.g., 05)
OR
[205] SPEED DIAL
05: _
Press UP or DOWN to select location and press RIGHT
soft key to move cursor
4. Enter trunk access code (e.g., 9) followed by the
number to be dialled (e.g., 08104264100)
[205] SPEED DIAL
05 : 9-08104264100_
If you make an error, press the HOLD key to clear an
entire entry or use the DOWN key to move the cursor
back