Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 205 (Page 1 of 1)
MMC: 205 ASSIGN LOUD BELL
DCS
33
CI
77
CII
33
816
33
408i
33
408
33
Designates the station that controls the loud bell ring output of one of the following:
DCS systems—a Trunk A card. Each Trunk A card has one loud bell output; these outputs are
given a Directory Number of 3901–3920 as a default value to enable them to be assigned.
Compact II systems—a Misc card (assigned in MMC 219, Common Relay Service Type).
816 and 408/408i systems—a base board (assigned in MMC 219, Common Relay Service
Type).
The loud bell will follow the ring cadence of the designated station. Only a station can be as-
signed to control the loud bell; a station group cannot be assigned.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Clears previous entry
ACTION DISPLAY
1. Open programming and select 205
Display shows current setting
[3
61] LOUD BELL
RING PAIR : NONE
2. Dial loud bell number (e.g., 362)
OR
Use UP or DOWN to scroll through loud bell
numbers and press RIGHT soft key to move the cursor
[362] LOUD BELL
RING PAIR : NONE
3. Enter station number (e.g., 201)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to return to step 2
[362] LOUD BELL
RING PAIR :201
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: NONE (Unassigned)
Related Items: MMC 219 Common Relay Service Type