Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 424 (Page 1 of 1)
MMC: 424 S0 MAPPING
DCS
33
CI
33
CII
33
816
33
408i
33
408
77
Generates a table by which an ISDN terminal number is mapped onto a BRI STATION port.
For a detailed description and other MMC-related procedures, refer to BRI Related MMC Proce-
dure in the S
0 Overview section of this manual (see Part 3, "Special Applications").
Note: For each BRI access, two adjacent ports are assigned. You need only map a number onto one of the
two ports. You can map only one port to each number. This means you can't use the same number in more
than one BRI access. However, more than one number can be mapped onto a port and used in a BRI ac-
cess.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 424
Display shows
[7801]S0 MAPPING
NONE
2. Dial an ISDN terminal number (e.g. 7803)
OR
Press UP or DOWN key to select the number and
press RIGHT soft key to move cursor
[7803]S0 MAPPING
NONE
3. Dial an ISDN station number (e.g. 703)
OR
Press UP or DOWN key to select the number and
press RIGHT soft key
[7803]S0 MAPPING
703
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: NONE
Related Items: MMC 419 BRI Option
MMC 423 S/T Mode