Samsung DCS-408I Telephone User Manual


 
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 508 (Page 1 of 1)
MMC: 508 CALL COST
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system administrator to set the Call Cost attributes generated by the system during a
call. This information can be displayed on the keyphone LCD during a call or as an SMDR re-
cord.
Attributes are as follows:
0 UNIT COST PER MP When the system is installed to receive MP on a C.O. outgoing call. It
is used for generating total call cost by multiplying it by the number
of pulses. Allows a maximum value of 5000.
1 CALL COST RATE This generates additional call cost calculated by multiplying this rate
by the original call cost. Ranges from 100 to 255.
WARNING
Changing a value when there is a call in progress may result in an inaccurate call cost.
This MPD facility requires the Meter Pulse Detection version of the trunk card. It is not avail-
able on the standard product.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Open programming and select 508
Display shows
U
NIT COST PER MP
0200PENCE
2. Dial 0 or 1 (e.g. 1)
OR
Press UP or DOWN key for selection and press RIGHT
soft key to move cursor
CALL COST RATE
100% _
3. Enter new value (e.g. 110 for 110 percent)
System returns to step 2
C
ALL COST RATE
110%
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: UNIT COST PER MP 200 pence
CALL COST RATE 100 percent
Related Items: MMC 110 Station On/Off
MMC 414 MPD/PRS Signal