Filter
Top Products
DCS SPECIAL APPLICATIONS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
3–19
Order of Programming
Carry out programming as shown in the diagram, below.
Note:
1. This item does not have to be programmed prior to MMC 419 or MMC 418 (because those MMCs
have no effect on this item). However, this item must be preceded by MMC 423.
2. This item displays its name as "BRI-TRK" or "BRI-STN" according to the port setting in MMC 423.
3. This item is only applicable when a BRI access is programmed as P-MP MSN in MMC 419.
4. Only for a STATION port set in MMC 423.
Example of programming a STATION port
Assume that you have a BRI card installed in DCS and its ports are numbered from 701 to
708. You want to use the 4th BRI access (707 and 708) as a STATION port to connect ISDN
terminals. The procedure is:
MMC 423
S/T mode
MMC 424
S0 Mapping (NOTE 1)
MMC 419
BRI-STN (NOTE 2)
MMC 419
BRI-TRK (NOTE 2)
MMC 421
MSN Digit (NOTE 3)
T S
Program MSN in your
ISDN terminal (NOTE 4)
MMC 418
Card Restart