Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 713 (Page 1 of 1)
MMC: 713 LCR MODIFY DIGIT TABLE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Also referred to as Outdial Rules, this enables the system to add or delete a digit string or single
digit, if needed, to complete a call (e.g. adding a digit “1”). The characters Q and # can also be
entered.
Option Max No. of Digit Entries
Number of digits to delete 15
Insert (before dialling string) 14
Append (after dialling string) 14
Digit String Key
Insert String + Digit String (delete) + Append String
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Open programming and select 713
Display shows
LCR MODIFY (0
01)
NOF DEL DGT:00
2. Enter index number (e.g., 005)
OR
Press UP or DOWN keys to make selection and
press RIGHT soft key to move cursor
LCR MODIFY (005)
NOF DEL DGT:00
3. Enter number of digits to delete (e.g. 2)
OR
Press RIGHT soft key to skip step and move cursor to
step 4
LCR MODIFY (005)
NOF DEL DGT:02
4. Enter digits to be inserted (e.g., 10288)
OR
Press RIGHT soft key to skip step or to store information and
advance to step 5
LCR MODIFY (005)
I:10288
5. Enter digits to be appended (e.g., 45678)
OR
Press RIGHT soft key to skip step or to store
information and return to step 2
LCR MODIFY (005)
A:45678_
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: Depends on software version
Related Items: MMC 710 LCR Digit Table
MMC 711 LCR Time Table
MMC 712 LCR Route Table