Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 113 (Page 1 of 1)
MMC: 113 VIEW MEMO NUMBER
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Allows the system administrator to enter memos on stations. Up to three memos can be entered,
depending on your system. MMC 116 (Alarm and Message) can be programmed to remind the
station user to read the memo(s).
Each memo can be up to 13 characters long and is entered using the dial keypad. For example,
press “6” once to enter the letter ”M”, and press ”3” twice for an ”E”. Continue selecting charac-
ters from the keypad to complete the memo. Press the programmable ”A” key to toggle between
upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
#
space
& ! : ? . , % $ - < > / =
[ ] @ ^ ( ) _ + { } | ; "
→
`
PROGRAM KEYS
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
“A” Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles uppercase and lowercase text.
ACTION DISPLAY
1. Open programming and select 113
Display shows
[2
01] VIEW MEMO
1:
2. Dial the station number (e.g., 205)
OR
[205] VIEW MEMO
1
:
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
3. Dial memo number (1–3)
OR
[205] VIEW MEMO
1:_
Press UP or DOWN to select and press RIGHT soft
key to move cursor
4. Press RIGHT soft key to move cursor and add
memo via dial keypad using above procedure
[205] VIEW MEMO
1:CALL TOM
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: None
Related Items: MMC 116 Alarm and Message