Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 726 (Page 3 of 3)
8. If option 4 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
characters A–C)
SEPARATOR
NO
9. If option 5 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
DISCONECT SIGNAL
C
characters A–C)
10. If option 6 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
CALL TYPE ID
DIRECT CALL : NO
characters A–C)
See above list under CALL TYPE ID options list
11. If option 7 is selected at step 2
(A valid entry consists of digits 0–9 or alpha
PROGRESS TONE ID
DIAL TONE :NO
characters A–C)
See above list under PROGRESS TONE ID
12. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
EXT FOR DN1 = Yes
TRK FOR DN1 = Yes
EXT FOR DN2 = No
TRK FOR DN2 = No
SEPARATOR = No
DISCONNECT SIGNAL = C
CALL TYPE ID:
DIRECT CALL 1
ALL FWD CALL 2
BSY FWD CALL 3
NOA FWD CALL 4
RECALL 5
DIR TRK CALL 6
OVERFLOW 7
DDI CALL 8
MESSAGE CALL 9
PROGRESS TONE ID = No (for all)
Related Items: MMC 207 Assign VM/AA Port