Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 603 (Page 2 of 2)
5. Enter valid trunk number (e.g., 729)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to return to step 2
[81] TRK GROUP
MEMBER 01:729
6. Repeat steps 1–5 to remove trunk from group 9 (or
group 0) if necessary
7. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: MODE=SEQUENTIAL
All trunks are in group 9 and/or 80 (group 9 only for 408/408i)
Related Items: LCR programming
Tenant programming (DCS only)