Filter
Top Products
DCS MMC PROGRAMS
COMBINED PROGRAMMING MANUAL NOVEMBER 2001
MMC 401 (Page 1 of 1)
MMC: 401 C.O. / PBX LINE
DCS
33
CI
33
CII
33
816
33
408i
33
408
33
Used to select the mode of the C.O. line. If PBX mode is chosen, this allows PBX access codes
to be recognised, thus allowing more complete toll restriction (call barring). This mode is as-
signed on a per-trunk basis. If a trunk requires the use of the RECALL key, it must be set to PBX
mode. Options are:
0 CO LINE
1 PBX
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Open programming and select 401
Display shows
[7
01] PBX LINE
CO LINE
2. Dial trunk number (e.g., 704)
OR
Use UP or DOWN to scroll through trunk numbers and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select ALL
[704] PBX LINE
CO LINE
OR
[ALL] PBX LINE
?
3. Dial 1 for PBX or 0 for C.O.
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
[704] PBX LINE
PBX LINE
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data: All trunks C.O. Line
Related Items: None