Panasonic DBS 824 Telephone User Manual


 
Call Forwarding Key Telephone Features
3-12 DBS 824-3.0/3.2-700 Revised April 2000
4. If you are forwarding to an internal number, enter the number of the
extension you want to receive your calls. If you are forwarding to an
outside number, press
AUTO
plus the appropriate speed dial number.
Note:
To forward to an outside number, the number must be pre-
programmed in personal or system speed dialing. Forwarding to an
outside number requires use of pooled access trunks (Dial 9, 81 - 86).
However, Dial 9 is not available when using Least Cost Routing mode.
5. Press the
ON/OFF
key.
The
DND/CF
LED lights.
“FWD-EXT 135” appears on the 2nd line of the display if extension
135 is selected. If a name is assigned to the extension, the name appears
instead of the extension number.
To cancel Call Forwarding
1. Press
ON/OFF
.
2. Dial “72.”
3. Hang up.
Related Programming
FF1 (System): Call Forward No Answer Timer
FF1 (System): Extension Class of Service Setting
FF3 (Extension): Extension Class of Service Assignment
FF3 (Extension): Permanent Call Forward Type
FF3 (Extension): Permanent Call Forward Extension
FF10 (Speed Dial): System Speed Dial Numbers
FF10 (Speed Dial): Personal Speed Dial Numbers
Considerations
DND and Absence Messages cancel Call Forwarding.
Calls to an extension with DND or Absence Message turned on are treated
differently, depending on whether they are trunk or intercom calls:
Intercom calls receive busy tone; trunk calls are routed to the extension