Filter
Top Products
System Features Direct Trunk Access
Revised April 2000 DBS 824-3.0/3.2-700 1-17
Direct Trunk Access
(CPC-S and CPC-M)
Description
Extensions can access a specific trunk for outgoing calls. Extensions can also
use Direct Trunk Access to test trunks or to access data trunks.
Operation
1. Press the
ON/OFF
key:
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Dial “88,” then enter the desired line number (01-08).
• The phone issues outside dial tone.
• “CO TALK #XX” (where “XX” is the line number) appears on the
display.
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
Considerations
• You cannot use the Direct Trunk Access feature if you are holding a call
that does not appear on a CO line key.
Distinctive Ringing
(CPC-S and CPC-M)
Description
Distinctive trunk call ringing patterns can be set up for each extension using
the Distinctive Ringing feature. Distinctive Ringing allows users to determine
which extension is ringing when several telephones are in the same area. If no