Filter
Top Products
SLT Features Call Transfer
Revised April 2000 DBS 824-3.0/3.2-700 5-14
• You can answer incoming calls, Intercom Tone Calling, or Intercom Voice
Calling using the Group Call Pickup feature. You cannot answer Paging or
Callback with this feature.
• Group Call Pickup cannot be used to pick up a ringing phone in Paging
Group 00. For example, if an extension is a member of Paging Groups 00
and 06, the extension can use Group Call Pickup to answer ringing calls in
Group 06, but not in Group 00.
Call Transfer
(CPC-S and CPC-M)
The DBS 824 provides two call transfer methods: blind transfer and screened
transfer.
SLTs can transfer trunk and intercom calls.
Blind Transfer
Description
Blind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.
Operation
1. Flash the switchhook to place the call on hold.
2. Dial the number of the extension to which the call is to be transferred.
3. Replace the handset before the other party answers.
• You can also replace the handset after the third party answers.
• The third party need only pick up the handset to speak to the outside
line.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Extension Transfer Recall Timer for CO Calls