Panasonic DBS 824 Telephone User Manual


 
Line Appearances Key Telephone Features
3-50 DBS 824-3.0/3.2-700 Revised April 2000
Operation
Related Programming
FF1 (System): Least Cost Routing (LCR) Access
FF1 (System): Alert Tone for Busy Override and OHVA
FF1 (System): Extension Class of Service Setting
FF2 (Trunks): Pooled Trunk Access for Group “9”
FF2 (Trunks): Pooled Trunk Access for Group “81-86”
FF3 (Extension): Forced Least Cost Routing
FF3 (Extension): Extension Class of Service Assignment
FF3 (Extension): Busy Override Send
FF3 (Extension): Busy Override Receive
FF3 (Extension): Page Group (0-7) Extensions
FF5 (Keys): FF Key Assignments (all)
FF8 (LCR): LCR Setting (all)
Considerations
Users can barge into a busy Direct Line (DL) and create a three-party
conference. To barge into a busy Direct Line, the user presses the DL key.
(The DL key will be lit red.)
“Barge-in for Direct Lines” is controlled by the program settings for Busy
Override. For instance, if an extension with a DL key does not want the DL
broken into, that extension must have “Busy Override Receive” turned off.
Operation Action
To originate a trunk call ... Press an idle DL key.
The key blinks (green) as the call is made.
To place a call on Exclusive Trunk Hold (page 3-29)
...
Press the DL key.
To place a call on System Trunk Hold (page 3-15) ... Press the
HOLD
key.
To transfer a call ... Press
HOLD
, dial the destination exten-
sion, and then press
PROG
.