Filter
Top Products
System Features Account Codes
Revised April 2000 DBS 824-3.0/3.2-700 1-3
Account Codes
You can assign account codes to clients to facilitate billing and to track call
dates and times, numbers called, and outside line numbers used. This
information is printed for each account on the SMDR record.
Non-Verified Account Codes
(CPC-S and CPC-M)
Description
Non-verified account codes can be forced or voluntary, depending on
extension programming.
With voluntary account codes, the user is not forced to enter an account code
before making a call. With forced account codes, the user must enter an
account code before accessing an outside line.
Non-verified account codes can be assigned to incoming and outgoing calls.
To assign an account code to an outgoing call, the user enters the account
code before making the call or during the call. To assign an account code to
an incoming call, the user enters the account code during the call.
To enter an Account Code before dialing:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
AUTO
key, then press “#.”
• “Enter Account #” appears on the display.
• If you are using a Single Line Telephone (SLT), dial “#7.”
3. Enter the Account Code (up to 10 digits).
4. Press “#.”
“Entered Account #” appears on the display.
5. Press a vacant CO key or dial a trunk access code.