Panasonic DBS 824 Telephone User Manual


 
Line Appearances Key Telephone Features
3-52 DBS 824-3.0/3.2-700 Revised April 2000
Operation
Related Programming
FF1 (System): Least Cost Routing (LCR) Access
FF2 (Trunks): Pooled Trunk Access for Group “9”
FF2 (Trunks): Pooled Trunk Access for Groups “81-86”
FF3 (Extension): Forced Least Cost Routing
FF4 (Ringing): Ringing and Hunt Groups (all)
FF5 (Keys): FF Key Assignments (all)
FF8 (LCR) LCR Settings (all)
Considerations
When all trunks in a group are busy, all of the corresponding MCO keys
light red.
If LCR is enabled, MCO keys can be assigned for trunk group 89.
However, the FF keys will not light.
Trunk lines flash red..
There are seven groups of outside lines: 9 and 81-86.
Press the MCO key that flashes green to answer an outside call.
If there are multiple outside calls, lift the receiver (or ON/OFF) to speak to
the first one. If more than one call comes in from an extension, then the
second receives busy tone.
Operation Action
To originate a trunk call Press an idle MCO key.
The key blinks (green) as the call is made.
To place a call on Exclusive Trunk Hold (page 3-29) Press the MCO key.
To place a call on System Trunk Hold (page 3-15) Press the
HOLD
key.
To transfer a call Press
HOLD
, dial the destination exten-
sion, then press
PROG
.