Filter
Top Products
Busy Override SLT Features
5-6 DBS 824-3.0/3.2-700 Revised April 2000
• FF1 (System): Dial Tone Detection Timer
• FF2 (Trunk): CO Busy Tone Detection
Busy Override
(CPC-S and CPC-M)
Description
Extensions in the same Paging Group (1-7) can break into one another’s
outside calls or intercom calls to relay information or to create three-party
Conference Calls.
Operation
Press “4” when you hear the busy tone.
An alert tone is issued at both phones.
Related Programming
• FF1 (System): Alert Tone for Busy Override & OHVA
• FF1 (System): Extension Class of Service
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Busy Override Send
• FF3 (Extension): Busy Override Receive
• FF3 (Extension): Extension Page Group
Considerations
• You cannot break in on three-party conference calls.
• The default for the override alert tone is “off.” If the override alert tone is
enabled, the tone will be sent to both parties when a call is overridden.