Filter
Top Products
Call Forwarding DSLT Features
4-8 DBS 824-3.0/3.2-700 Revised April 2000
Note:
Outside numbers used for call forwarding must already be
programmed into speed dialing. (See page 4-32 for instructions.)
5. Replace the handset or press
ON/OFF
.
To cancel Call Forwarding
1. Lift the handset or press
ON/OFF
.
2. Dial “72.”
3. Replace the handset or press
ON/OFF
.
Related Programming
• FF1 (System): Call Forward -- No Answer Timer
• FF1 (System): Extension Class of Service
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Permanent Call Forward Type
• FF3 (Extension): Permanent Call Forward Extension
• FF10 (Speed Dialing): System Speed Dial Numbers
• FF10 (Speed Dialing): Personal Speed Dial Numbers
Considerations
• Calls can be forwarded to extensions that have call forwarding activated.
For example, phone “A” can be forwarded to phone “B,” even if phone
“B” is forwarded to voice mail.
• Extensions receiving forwarded trunk calls display “CFWD NNN
XXXXXX,” where “NNN” = the extension that forwarded the call and
“XXXXXX” = the trunk name or number.
Calls to an extension with DND or Absence Message turned on are treated
differently, depending on whether they are trunk or intercom calls.
Intercom calls receive busy tone; trunk calls are routed to the extension
defined in permanent call forwarding.
The following types of incoming trunk calls follow permanent call forward
settings:
- Direct trunk calls