Filter
Top Products
Call Transfer DSLT Features
4-14 DBS 824-3.0/3.2-700 Revised April 2000
Call Transfer
(CPC-S and CPC-M)
The DBS 824 provides two call transfer methods: blind transfer and screened
transfer.
Blind Transfer
Description
Blind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.
Operation
1. Press the
HOLD
key to place the call on hold.
2. Dial the extension number to which the call is to be transferred.
3. Replace the handset before the other party answers.
• You can also replace the handset after the third party answers.
• The third party need only pick up the handset to speak to the outside
line.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Extension Transfer Recall Timer for CO Calls
• FF1 (System): Attendant Transfer Recall Timer for CO Calls
Considerations
• For users to transfer calls by pressing
HOLD
, dialing an extension, and
going onhook, the Onhook Transfer feature must be enabled.
• You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.