Filter
Top Products
System Features Night Service
Revised April 2000 DBS 824-3.0/3.2-700 1-25
Night Service
(CPC-S and CPC-M)
Description
The Attendant can switch the system between Day and two Night Modes for
answering outside calls. It is also possible to program the system to
automatically switch between night and day modes.
While in a Night Mode (generally used at night or any time when your office
is closed), incoming calls can ring at selected extensions (a night watchman’s
extension, for example), an extension connected to an answering machine, or
to a Universal Night Answer point. Universal Night Answer (UNA) is used to
allow calls to be picked up from any extension.
See page 1-43 for information on setting a UNA point.
See “Auto Day Mode” (page 1-6) for information that allows automatic
switching between day and night modes.
Operation
To switch to a Night Mode:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Dial “#522” for Night1 mode or “#523” for Night 2 mode. (
Note
: #520
can be used to toggle between Day, Night1 and Night2 modes.)
3. Press the
ON/OFF
key.
• The
ON/OFF
LED goes off.
• “NIGHT MODE” or “NIGHT2 MODE” appears on the display.
To switch to Day Mode:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.