Filter
Top Products
One-Touch Keys Key Telephone Features
3-64 DBS 824-3.0/3.2-700 Revised April 2000
To assign access codes to a One-Touch key:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
PROG
key.
3. Press the One-Touch key to be programmed.
4. Enter the access number.
5. Press the
REDIAL
key.
This inserts a pause between the access code and the telephone number.
6. Press the
HOLD
key.
7. Press the
ON/OFF
key.
The
ON/OFF
LED goes off.
To check a programmed One-Touch key:
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Press the
CONF
key.
“C” appears in the display.
3. Press the One Touch key to be checked.
The programmed data appears on the display.
4. Press the
ON/OFF
key.
• The
ON/OFF
LED goes off.
• The date and time appears on the display.
Considerations
• If the pause following an access code is too short, press the
REDIAL
key
more than once.