Panasonic DBS 824 Telephone User Manual


 
Off-Hook Voice Announce (OHVA) DSLT Features
4-28 DBS 824-3.0/3.2-700 Revised April 2000
3. Upon hearing busy tone, press “5.”
To transfer a call using OHVA
1. Press the
HOLD
key.
2. Dial the number of the extension to which the call will be transferred.
Your phone issues a busy tone if the extension is already on a call.
3. Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the
FLASH
key to cancel the transfer.
4. Press “8.”
5. Replace the handset.
To answer the call from a DSLT:
1. Press
CONF
to speak with the announcing party.
2. Press
CONF
again to disconnect the announcing party and return to the
original call.
Related Programming
FF1 (System): Onhook (Automatic) Transfer
FF1 (System): Alert Tone for Busy Override & OHVA
FF1 (System): Extension Class of Service Setting
FF3 (Extension): Extension Class of Service Assignment
FF3 (Extension): Call Waiting/OHVA
Considerations
If Onhook Transfer is enabled, the held call is transferred as soon as the
extension sending the OHVA hangs up.
If the transferred call is not answered immediately, it will queue for a
specified time and then return to the extension sending the OHVA. (The
recall time is set in the Transfer-Recall Timer.)
You cannot receive a Call Waiting message during an OHVA.