Panasonic DBS 824 Telephone User Manual


 
Handsfree Answerback Key Telephone Features
3-42 DBS 824-3.0/3.2-700 Revised April 2000
If a new code is programmed into a key, the previously programmed code
is erased.
To erase a code programmed into a key, press the
HOLD
key when the
display reads “Enter Code.” “Code Cleared” then appears on the display.
The system can be programmed so that Pooled Trunk Access calls
automatically use LCR when 9 is selected.
Night Service, DND, and BGM can be activated through FF keys without
lifting the handset.
When you are making a call using the Speed Dialing feature, the
FLASH
key stored in Speed Dialing becomes the PBX flash feature.
Handsfree Answerback
(CPC-S and CPC-M)
Description
Use the Handsfree Answerback feature to answer a call without lifting the
handset. Your extension must be programmed for Voice Calling for you to
use this feature. If your extension is not set for Voice Calling, the caller must
press “1” during a call to switch from Tone Calling to Voice Calling.
Operation
1. Confirm that the
MUTE
LED is off.
If it is lit, press the
MUTE
key to turn it off.
2. Speak into the microphone.
Related Programming
FF1 (System): Extension Intercom Calling
Considerations
Stay within three feet of the microphone.
The
MUTE
feature can be selected from the Menu screen on large display
phones. With other DBS 824 key phones, the
MUTE
function is assigned
to a fixed key.