Filter
Top Products
Key Telephone Features Flexible Function (FF) Keys
Revised April 2000 DBS 824-3.0/3.2-700 3-39
Note:
The speed dial code must include the
CONF
key (to indicate a
trunk call), the appropriate trunk access code, and the outside number.
8. Press the
HOLD
key.
To assign a Hunt Group pilot number or an extension number to an
FF key:
1. Press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the FF key to be programmed.
“Enter Code” appears on the display.
4. Enter “72.”
5. Enter the Call Forwarding code (0, 1, 2, or 4).
6. Enter the Hunt Group pilot number or an extension number.
7. Press the
HOLD
key.
To erase a code stored in an FF key:
Note:
FF keys assigned as CO lines cannot be cleared using the following
procedure. CO line keys can only be cleared through system programming.
1. Press the
ON/OFF
key.
2. Press the
PROG
key.
3. Press the FF key to be programmed.
“Enter Code” appears on the display.
4. Press the
HOLD
key.
“Code Cleared” appears.
To check a programmed FF key:
1. Press the
ON/OFF
key:
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.