Filter
Top Products
2.0 Features Update Appendix A
A-14 DBS 824-3.0/3.2-700 Revised April 2000
Ring Patterns Not Applicable to Analog Device.
The following ring pattern
addresses
will not
affect the analog device:
Transfer Ring Pattern FF1 2# 1# 28# (0-6)#
SLT DISA Ring Pattern FF1 2# 1# 30# (0 or 1)#
Inbound Ring Pattern FF2 (Trunk)# 17# (0-9)#
Flash Interaction.
Any disconnect signal sent to the analog port must be greater
than the SLT Flash Control; otherwise the disconnect signal will be interpreted as a
flash and the call will be placed on hold.
Programming Addresses That Affect the Analog Device.
The following addresses
will control the analog device, but will not affect the digital key telephone:
SLT Disconnect Duration FF1 2# 1# 31# (0-15)#
SLT Flash Control FF1 2# 1# 11# (0 or 1)#
SLT Onhook Flash Timer FF1 3# 12# (0-6)#
SLT Disconnect Signal FF3 (ExtPort)# 45# (0 or 1)#
Analog Port on Large-Display Phone FF3 (ExtPort)# 51# (0 or 1)#
Data Security on Analog Port FF3 (ExtPort)# 52# (0 or 1)#
MSG (Message) Key
44-Series phones only
CPC-S/M Version 2.0 and higher
Description
The MSG key on the VB-44225 Large-Display Phone adds the following
functionality to the phone:
•
Auto-Callback.
If a callback message has been left by another extension, you
can press the MSG key to place an automatic callback to the extension that sent
the message. If more than one callback message has been received, pressing the
MSG key will perform auto-callback in the order received.
•
Auto-Answer Voice Message.
You can press the MSG key to automatically
access your voice mailbox. The phone will dial your voice mailbox and send
access codes (if programmed) for retrieving new messages.
Programming
Auto-Callback is always enabled for large display phones. Use the following to
enable the MSG key for Auto-Answer Voice Message.