Filter
Top Products
Key Telephone Features Absence Message
Revised April 2000 DBS 824-3.0/3.2-700 3-5
• “At Lunch” appears on the display if you selected message code 1.
To cancel an Absence Message
1. Press the
ON/OFF
key.
• The phone issues intercom dial tone.
• The
ON/OFF
LED lights.
2. Dial “71.”
“Enter Msg Code” appears on the display.
3. Press the
ON/OFF
key.
• The
ON/OFF
LED goes off.
• The
DND/CF
LED goes off, and the message disappears from the
display.
Related Programming
• FF1 (System) Extension Class of Service Setting
• FF3 (Extension) Extension Class of Service Assignment
• FF6 (Names and Messages): Absence Messages
Considerations
• Calling parties without a display get a busy signal, rather than the Absence
Message.
• If a message code number that has not been programmed is selected,
“Absence,” followed by the code number, appears on the display.
• Absence Message return times can be input as shown in the following
table:
Table 3-2. Example Return Times for Absence Messages
Input Display
No input Return
9 Return 9:00
11 Return 11:00