Panasonic DBS 824 Telephone User Manual


 
Attendant Features Attendant-Controlled Text Assignment
Revised April 2000 DBS 824-3.0/3.2-700 2-7
On DSS consoles equipped with DSS keys, the indicator for an extension
that has Absence Message, Call Forwarding, or DND activated lights
green. This indicator goes off when the feature is canceled. The indicator
does not light for Permanent Call Forwarding.
Attendant-Controlled Text Assignment
(CPC-S and CPC-M)
Description
The attendant can assign text to extensions, system speed dial numbers, and
Call Waiting/OHVA text replies without using a DSS/72 or entering the
programming mode.
Text is assigned through the dial pad on the attendant phone.
Operation
To assign names to extensions:
1. Pick up the receiver or press the
ON/OFF
key.
2. Press
PROG
.
3. Dial #2.
4. Enter the extension’s port number.
5. Press
AUTO
to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 on page 2-8 to enter letters
and/or numbers.
Press
FLASH
after each letter.
Press
CONF
to switch between numbers and letters.
7. To store your entry, press
HOLD.
To assign names to System Speed Dial numbers:
1. Pick up the receiver or press the
ON/OFF
key.
2. Press
PROG
.