Panasonic DBS 824 Telephone User Manual


 
SLT Features Call Forwarding
Revised April 2000 DBS 824-3.0/3.2-700 5-8
Operation
To activate Call Forwarding:
1. Lift the handset.
The phone issues intercom dial tone.
2. Dial “72.”
3. Dial the appropriate call forwarding code.
4. If you’re forwarding to an extension, enter the number of the extension
you want to receive your calls. If you’re forwarding to an outside number,
dial
“0” plus the appropriate speed dial number.
Note:
To forward to an outside number, you must have already
programmed the number into personal or system speed dialing. You can
forward to any speed dial number (system or personal). This requires
pooled trunk access (9, 81-86). However, dial “9” trunk access cannot be
used when Least Cost Routing is active.
5. Replace the handset.
To cancel Call Forwarding
1. Lift the handset.
2. Dial “72.”
3. Replace the handset.
Related Programming
FF1 (System): Call Forward--No Answer Timer
FF1 (System): Extension Class of Service
Call Forward
Type
Code
All 0
Busy/no answer 1
Busy 2
No answer 4