Filter
Top Products
Attendant-Controlled Text Assignment Attendant Features
2-8 DBS 824-3.0/3.2-700 Revised April 2000
3. Dial #1
4. Press
AUTO
.
5. Dial the desired system speed dial number (00-89 or 000-199).
6. Press
AUTO
to backspace and erase the existing name.
7. Use the dialpad sequences shown in Table 2-1 to enter letters and/or
numbers.
Press
FLASH
after each letter.
Press
CONF
to switch between numbers and letters.
8. To store your entry, press
HOLD.
To assign text to Call Waiting/OHVA Text Replies):
1. Pick up the handset or press
ON/OFF
.
2. Press
PROG
.
3. Dial #5
4. Dial 1-5, depending on which text message you want to change.
5. Press
AUTO
to backspace and erase the existing name.
6. Use the dialpad sequences shown in Table 2-1 to enter letters and/or
numbers.
Press
FLASH
after each letter.
Press
CONF
to switch between numbers and letters.
7. To store your entry, press
HOLD.
Table 2-1. Key sequences for text assignment.
Key Number of Key Presses
Once Twice Three
times
Four
times
Five
times
Six
times
1 Space Q Z Space q z
2ABCabc
3DEFdef
4GHI ghi