NEC 1093099 Telephone User Manual


 
Conference
DSX Feature Handbook Features 37
Features
Conference
Description
Conference lets an extension user add additional inside and outside callers to their conversation. The follow-
ing table shows the system’s Conference capacities:
The system’s 32 Conference circuits are dynamically allocated as users request them.
Operation
A user can set up a multiple-party telephone meeting without leaving the ofce.
Description Capacity
Conference circuits 32
Maximum simultaneous users in Conference
(total of all Conferences system-wide)
32
Maximum simultaneous conferences 8
Maximum parties in any one Conference
(lines and/or extensions)
8
Setting up a Conference
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To set up a Conference:
1.
Establish an Intercom or outside call.
2.
Press CONF.
Your hear Intercom dial tone.
Your caller hears Music on Hold (if installed) while they wait for you to set up the Conference.
3.
Do one of the following:
a.
Dial extension you want to add.
b.
Place or answer an outside call.
c.
Retrieve a call from Park Orbit.
4.
Press CONF to set up the Conference.
If you cannot add additional parties to your Conference, you have exceeded the system’s Conference limit.
5.
Repeat steps 2-4 to add additional parties to your Conference. You can also do one of the following.
a.
To optionally place a Conference on Hold:
Press HOLD.
b.
To reinstate the Conference on Hold.
Press CONF.