Last Number Redial
96 ◆ Features DSX Feature Handbook
Last Number Redial
Description
Last Number Redial allows an extension user to quickly redial the last outside number dialed. For example,
a user may quickly recall a busy or unanswered number without manually dialing the digits. Last Number
Redial saves in system memory the last 20 digits a user dials. The number can be any combination of digits
0-9, # and *. The system remembers the digits regardless of whether the call was answered, unanswered or
busy. The system normally uses the same line as for the initial call. However, if that line is busy and is part of
a Line Group, Last Number Redial will automatically select the next line in the group. The user can also pre-
select a specific line if desired.
Enhanced Last Number Redial
If enabled, Enhanced Last Number Redial allows the extension user to select from the last 5 outside numbers
dialed. When the user places an outside call, the number dialed is stored in the Enhanced Last Number
Redial buffer. This buffer saves the 5 most recent numbers (including Speed Dial calls), with the most recent
call at the top of the buffer and the oldest number at the bottom of the buffer. Old calls get pushed off the bot-
tom of the buffer to make room for new calls at the top. If a user dials a number that is already stored in the
buffer, the system inserts the number at the top of the buffer and deletes the duplicate entry.
The numbers stored in the Enhanced Last Number Redial buffer are retained if the system resets or is pow-
ered down.
Operation
Quickly redial the last number dialed.
Using Last Number Redial
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To redial your last call:
1.
Lift the handset.
2.
(Optional) Press an idle line key to preselect a line.
• If you skip this step, the system automatically selects a line from the same group as your initial call.
3.
Press REDIAL.
• If you hear busy tone and your extension has Line Queuing, you can dial 2 to queue for a line to become free.
If you hang up, the system converts the queue to a Line Callback.
- With Line Queuing, the number automatically redials when a line is available.