Filter
Top Products
Call Timer
26 ◆ Features DSX Feature Handbook
Call Timer
Description
Call Timer lets a keyset user with a Call Timer key time their outside calls on the telephone display. There
are two types of Call Timer keys:
❥ Manual Call Timer
Any time while placing a call or while on a call, a display keyset user can press their Manual Call Timer
key to start the Call Timer. The Call Timer will continue until the user hangs up or presses their Manual
Call Timer key again.
❥
Automatic Call Timer
In addition to the features of the Manual Call Timer key, the Automatic Call Timer key provides automatic
timing for outside calls. When a display keyset with an Automatic Call Timer key places or answers an out-
side call, the Call Timer automatically starts when that outside call connects. The Automatic Call Timer
does not automatically start for Intercom calls. The Automatic Call Timer can also work like a Manual Call
Timer key. There is no need to have a Manual and Automatic Call Timer key on the same phone.
The Call Timer feature also provides:
❥ Review of Previously Timed Call
Any time after hanging up from a timed call, a display keyset user can press their Manual or Automatic
Call Timer key to review the duration of that call.
❥ Timer Reset for Current Call
While the display keyset user is timing their call, they can press CLEAR at any time to reset the Call
Timer to 00:00:00.
❥ Automatic Timer Stop
The system assigns the Call Timer to the active call. When the user terminates the active call, the Call
Timer automatically shuts down.
❥
Wrap-up Timer Display
After hanging up a timed call, a display keyset will show the Call Timer data for 6 seconds before returning
the display to idle. This gives the extension user adequate time to make a record of the timed call, if desired.
Operation
Call Timer helps users that must keep track of their time on the phone.
Automatically Timing Your Outside Call
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To time your outside call if you have an Automatic Call Timer key:
1.
Place or answer outside call.
• The Call Timer starts automatically. The Automatic Call Timer key lights red while the system times the call.
Manually Timing Your Outside Call
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To manually time your Intercom or outside call:
1.
While placing or while on the call, do one of the following.
a.
[Timer]
[Time]
Press the Call Timer soft key.
b.
Press the Manual or Automatic Call Timer key.
• The Automatic Call Timer key lights red while the system times the call.