Filter
Top Products
User Programmable Features
164 ◆ Features DSX Feature Handbook
User Programmable Features
Description
User Programmable Features allow an extension user to dial mnemonics to customize the way certain features
work on their telephone. With User Programmable Features, there is no need to rely on a System Administra-
tor or Communications Manager to set up each phone. These User-Programmable Features include:
❥ Call Forwarding Clear All
See Call Forwarding (page 21) for more.
❥ Direct Station Selection (DSS) Assignment
See Direct Station Selection (DSS) (page 44) for more.
❥ Feature Key Assignment
See Feature Keys (page 70) for more.
❥ Feature Key Ringing for Call Coverage Keys, Group Call Pickup Keys, and Line Keys
See Call Coverage Keys (page 19) for more.
See Group Call Pickup (page 79) for more.
See Line Keys (page 100) for more.
❥ Headset Mode
See Headset Compatibility (page 85) for more.
❥ Hotline Key Assignment
See Hotline (page 90) for more. (Note that a keyset user with a DSS Console can use the #HL user-pro-
grammable procedure to change the Hotline assignments on their console.)
❥ Off Hook Signaling Setup (including Camp-On, Off Hook Ringing for outside calls, and Voice Over for
Intercom calls)
See Off-Hook Signaling (page 114) for more.
❥ Paging (Incoming)
See Paging (page 116) for more.
❥ Prime Line Assignment
See Prime Line Preference (page 123) for more.
❥ Programmable Idle Menu Soft Keys (Super Display)
See Programmable Idle Menu Soft Keys (Super Display) (page 127) for more.
❥ Ringing Line Preference
See Ringing Line Preference (page 135) for more.
❥ Speed Dial Bin Setup (Personal and System)
See Speed Dial (page 149) for more.
❥ Time and Date
See Time and Date (page 160) for more.
❥ Voice Announce (For incoming Intercom calls)
See Intercom (page 93) for more.
Extension users can set up their telephones to meet their own unique requirements.
User Programmable Features
To program a feature, press # and the feature’s code. For example, to enable incoming Paging, press # and dial V P Y, then
SPEAKER to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature Mnemonic Numeric Operation Access Level
Call Forwarding Clear All
#CC #22
#CC
+ Y to clear (cancel) forwarding or N to
exit without clearing + SPEAKER to hang up.
4 and 5
Headset Mode
#HS #47
#HS
+ Y to enable or N to disable + SPEAKER
to exit.
3-5