Filter
Top Products
30 Revision B
5230 IP Appliance User Guide
Headset
Use this feature to enable and disable headset operation.
To enable/disable your headset
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Run.
3. Go to the desired category page.
4. Tap the desired headset Feature Key:
• To enable headset operation, tap the Headset On Feature Key.
• To disable headset operation, tap the Headset Off Feature Key.
To program a Headset Feature Key
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Edit.
3. Go to the desired category page.
4. Tap the Feature Key you want to program as a Headset.
5. In the drop-down menu, select the desired Headset setting, then tap OK:
• Headset On: used to enable headset operation.
• Headset Off: used to disable headset operation.
6. If desired, enter a label for this Feature Key.
7. If you are programming a Headset On Feature Key:
• If desired, select Turn headset off when PDA is removed.
8. Tap OK. Your Headset Feature Key is ready to use.
Note: We recommend you disable your headset before removing your PDA from the
5230 IP Appliance. If you do not, you may have problems making calls without the
PDA.
Note: You can set the Headset On feature to automatically disable your headset
when you undock your PDA, but you will have to re-enable your headset the next time
you dock your PDA.