Filter
Top Products
6 Revision B
5230 IP Appliance User Guide
Tips for Your Comfort and Safety
Don’t Cradle the Handset!
Prolonged use of the handset can lead to neck, shoulder or back discomfort, especially if
you cradle the handset between your ear and shoulder. If you use your phone a lot, you
may find it more comfortable to use a headset.
Use only Mitel Networks headset approved for operation with the 5230 IP Appliance; talk
to your authorized Mitel Networks vendor for information on these headsets. For information
on using a headset to make calls, see “Headset Operation” on page 48.
Protect Your Hearing
Your phone has a control for adjusting the volume of the handset receiver or headset (see
“Setting Your Preferences” on page 11). Because continuous exposure to loud sounds can
contribute to hearing loss, keep the volume at a moderate level.
Adjusting the Viewing Angle
The 5230 IP Appliance has two viewing angle settings. Use the setting that is most
comfortable for you. To change the viewing angle of your phone, remove the stand, and
re-insert it in the alternate position.
Installing the Stand
1. Press both stand latches (
) inwards to unlock the stand, then remove the stand.
2. Re-insert the stand in the alternate position, pivot first (
). The bottom position (—) is
the more vertical position, and the top position (- - -) is the more horizontal position.
3. Press the stand latches (
) outwards (from inside the stand) to lock the stand in place.