Filter
Top Products
24 Revision B
5230 IP Appliance User Guide
Account Codes
Account codes are used to track incoming and outgoing calls. Account codes are three digits
in length, from 000 to 999. You can program a Feature Key with an account code for
convenience.
To use an Account Code Feature Key during a call
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. Make sure you are in Run mode.
3. Go to the desired category page.
4. Tap the appropriate Account Code Feature Key.
To create/edit an Account Code Feature Key
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Edit.
3. Go to the desired category page.
4. Tap the Feature Key you want to program as a Account Code.
5. In the drop-down menu, select Account Code, then tap OK.
6. Enter a label for this Account Code Feature Key.
7. Enter the account code number.
8. Tap OK.Your Account Code Feature Key is ready to use.
Call Park
Use this feature to pick-up a call parked by the attendant.
To retrieve a parked call using a Feature Key
1. Open the Feature Keys application (see “Starting the 5230 PDA Phone Application”
on page 8).
2. In the Modes menu, select Run.
3. Go to the desired category page.
4. Lift the handset. OR Press the
key.
5. Tap the desired CP-Rmt Retrieve Feature Key.
To program a Call Park Feature Key
1. Start the Feature Keys application (see “Starting the 5230 PDA Phone Application” on
page 8).
2. In the Modes menu, select Edit.
3. Go to the desired category page.