Honeywell 7900 PDAs & Smartphones User Manual


 
3 - 6 Dolphin® 7900 Series Mobile Computer User’s Guide
Side Panel Features
The following graphic shows the left, side panel.
Programmable Side Button
Programmable buttons are located on both side panels. By default, these buttons activate the image/scan engine
as a more ergonomic alternative to pressing the Scan key on the keyboard. These buttons can be programmed to
perform specific functions in the Buttons setting. For details,
see Buttons on page 7-3.
Access Door
When the access door is open, the mini-SD memory interface and SIM card slot are available. The following graphic
displays both slots as they appear when the Dolphin terminal is placed flat with the keyboard facing down.
Opening the Access Door
Note: Access door removal requires a special tool from Hand Held Products, part number 100001024.
1. Press Blue + Backlight key to put the terminal in Suspend Mode; see Suspend Mode on page 2-11.
2. Remove the battery; see page 2-5.
3. Place the terminal on a flat, secure surface with the keyboard face-down.
Mini-SD Interface
You can install a mini-SD card to expand the capacity of the terminal’s storage memory. After
memory expansion is complete, this door should be closed and sealed. 256 MB cards are
currently available from Hand Held Products. (The mini-SD memory interface does not
support SDIO.)
SIM Card
SIM cards are used with a GSM/GPRS radio.
Programmable Side Button
Access Door
Mini-SD Interface
SIM Card Slot