Filter
Top Products
16 - 2 Dolphin® 7900 Series Mobile Computer User’s Guide
Charge/Analyze Slot
This is the fourth slot and the only one that can be used to analyze a battery. When a battery is placed in this slot,
it begins charging just as it does in the other three slots. However, if you press the ANALYZE button, it runs the
battery in this slot through the complete Analyze cycle. For more information,
see Using the Battery Analyzer on
page 16-4.
Battery Capacity Indicator LEDs
These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For
more information,
see Battery Capacity Indicator LEDs on page 16-2.
Analyze Button
Press this button to start a battery analyze cycle; see Using the Battery Analyzer on page 16-4.
Status LEDs
A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the
batteries in its slot.
Rear Panel
Power Switch
Toggle the power switch to turn the QuadCharger on and off.
Power Supply Connector
Use this connector to attach the power supply to the QuadCharger. The universal power supply accepts input
voltages between 90-265 volts.
Status LED color This color indicates that the battery in the slot…
Green Has completed its charge cycle and is ready for use.
Orange Is being charged at a maximum charge rate.
Red Encountered an error during the most recent charge cycle.
1
2
3
4
Swc
O
CHARGE/ANALYZE
0%
ALYZE
LOT 4
T
TE
R
Y
PACITY
0%
Power Supply Connector
Power Switch
Status LED