Filter
Top Products
Dolphin® 7900 Series Mobile Computer User’s Guide 9 - 5
Config Tab
The Config tab provides a list of all APs and peer stations in range. Its configuration tool enables you to create and edit SSID
profiles for APs that you want your station to associate with.
Preferred Profiles This Preferred Profiles section displays a list of preferred profiles for AP in the network created by the
user, or added from the Active SSIDs table. When turned on, the radio searches for the APs in the
exact order shown in the list of profiles. This section is blank after the initial installation and each hard
reset thereafter. This section remains blank if there no automatic association preference selected.
This section contains several icons that enable you to add and configure APs.
Active SSIDs The Active SSIDs table lists all APs or peer stations (creator of IBSS) in the vicinity of the host. It
displays only those SSIDs that accept broadcast associations.
Each record displays information in the following six columns (The screen may not display all the
fields in the following table. Use horizontal scroll bar to view all):
Icon Name Description
New
This button is always active. Tap it to create a new profile on a series of
screens; for instructions,
see To Create a New Profile on page 9-7.
The following buttons activate only when an Active SSID in the Preferred Profile list is selected.
Edit
Tap this button to open the configuration screens for the selected SSID.
Delete
Tap this button to delete the selected SSID from the Preferred Profile list.
Up
Tap this button to move the selected SSID up one place in the Preferred
Profile list.
Down
Tap this button to move the selected SSID down one place in the
Preferred Profile list.
Remember that the terminal accesses the SSIDs in this list in the exact order that they appear;
moving an SSID up or down in the list determines the order of contact.
Column This column displays…
SSID
The Network Name of the AP or peer station and shows the signal strength icon
.
Signal Strength in percentage for the selected SSID.