Filter
Top Products
11 - 20 Dolphin® 7900 Series Mobile Computer User’s Guide
uPhone Configuration
uPhone Settings enable you to establish the normal operating parameters for uPhone applications.
Accessing
You can access uPhone Settings two ways:
1. Go to Start > Settings > System tab > uPhone icon.
2. In the Dialler application, selecting Tools > Configuration.
3. The configuration utility opens displaying the General Tab (page 11-21).
Requirements
Because you will be adjusting network settings, the GSM radio must be enabled, and a SIM must be installed for it to open
correctly. If not, you will receive a notification message when you try to open the control panel.
If the radio is enabled and a SIM installed, the following message displays while the system accesses the network:
“Settings on the Network are being accessed. Please wait…”
If there is no response from the network within 60 seconds, this message times-out and the control panel closes. Otherwise, the
uPhone Settings screen displays; the General tab appears first by default.
Tab Windows
uPhone Settings consists of five tabs: General, Network, Divert, Bar, Messaging, and Other.
Tapping OK accepts any changes and exits the uPhone Settings.