Fujitsu SRS-9924-ABM Telephone User Manual


 
2 APPENDIX A
NI / 5E Custom Appendix - Terminal Testing
A
PERFORMING
TESTS
LED Test
The following sections summarize the self-tests that
you can perform.
The LED test is done first automatically. It turns all
LEDs red for the duration of the test. Observe the
LEDs for malfunctions.
When the LED test is complete, you can start any
of these tests:
Press 1 to start the Tone test.
Press 3 to start the LCD tests.
Press 4 to start the Memory/Line test.
These tests are described in the sections below. Tests
1, 2, 3, and 4 can be started and interrupted at
will to change the test under way, but test 4 cannot
be interrupted by pressing any key.
Pressing any button other than 1 through 4, and 6
through 9, which are reserved for test selection,
sounds its associated confirmation tone, turns its
LED red (if it has one), and displays the following
information on the LCD:
Key Test
For the keys:
Soft keys
Menu Key
Multifunction buttons
With the range and
meaning shown here:
X = 1:SOFT1 2:SOFT2
3:SOFT3 4:SOFT4
Menu Key
MSG LED turns red
NI Key Number (nn:)
1-6: SRS-9912
1-17: SRS-9924
21-50: SRS-9924-ABM
51: Mic-Off Display
5E Custom
Key Number (nn:)
1-6: SRS-9912
1-17: SRS-9924
18-47: SRS-9924-ABM
48: Mic-Off Display
This information is
displayed:
SOFTWARE Key X
Menu
MULTI ASSIGN KEY nn