Filter
Top Products
3-25
3
Using the NI / 5E Custom Terminal Set-Up
MIC-OFF
<SRS-9924>
If you deactivate MIC-OFF, assign the upper right
button as a one-touch button, and then try to
reactivate MIC-OFF, the button’s LED turns red as a
warning. You must quit the procedure (press * to
return to the menu mode main menus) and cancel
the one-touch number before you can reactivate
MIC-OFF.
If you try to reactivate MIC-OFF without doing this,
the message INVALID SELECTION appears and your
attempt fails.
If you are deactivating the MIC-OFF button, make
sure the function is turned off (the LED is unlit)
before beginning the procedure.
This is option 11 in the 5E Custom OPTIONS
Menu, but the later steps to deactivate MIC OFF
are the same.
1.
OPTIONS
12 ENTER
MIC-OFF KEY MODE
NON SUPPORTED
2.
ENTER
1: SUPPORT 2: NO SUPPORT
(SELECT 1-2)
The LED in the upper right button indicates its
current state:
•
Off: Unassigned
•
Green: Active as MIC-OFF
•
Red: Assigned as a one-touch button
If you wish to reactivate MIC-OFF, you must first
cancel the one-touch assignment on the upper right
button.
3. Press 1, then ENTER to activate MIC-OFF Or
Press 2, then ENTER to deactivate MIC-OFF:
SUPPORTED
COMPLETED
5E CUSTOM ONLY