Filter
Top Products
6-2
6
NI / 5E Custom Terminal Accessories
Handset
Figure 6-2:
Handset
Features
Fujitsu has developed an application file using
Microsoft Excel for Windows and Macintosh to assist
you in printing the templates. These files are
available for no charge via our World Wide Web
site at http://www.fnc.fujitsu.com.
The template that is shipped on the set is not
designed for use with the printing program.
For use with the printing application, Fujitsu has
included one sheet of laser printer compatible paper
templates in the box with Digital Set. Do not
separate the templates until printing is complete.
As an alternative to printing, you may print, type,
or write in the needed designation on the template.
Additional templates may be purchased from your
distributor or from Fujitsu.
Any loose materials must be removed before
placing the template in the laser printer. Failure
to remove loose materials may result in a paper
jam in the printer. Templates are fed via the
automatic or manual feed trays.
Please address questions about the program to FNC
TAC, at 1-800-228-ISDN.
The handset modular plug is located beneath a
cover. Insert a pointed object into the notch and
pry the cover off to remove the plug. The opposite
end of the handset cord plugs in beneath the
terminal.