3-10
3
Using the NI / 5E Custom Terminal Set-Up
UNANSWERED CALL
LOGGING (UNA)
If enabled, this
feature records
information about
incoming calls that
were not answered
at this phone.
1.
OPTIONS
3 ENTER
PRIVATE DATA CLEAR
(1:YES 2:NO) ->
2. Press 1, then ENTER to clear all data, Or
Press 2, then ENTER to retain all data.
If you choose 1, this screen appears:
PRIVATE DATA CLEAR
COMPLETED
To return to normal operation, press OPTIONS.
For each unanswered call (up to eight), the set
records the date and time of the call plus the
telephone number of the calling party. The ninth
and later unanswered calls replace the first, second,
and so forth, in order, so your UNA list always has
the most recent eight. (If the caller gets a busy
signal, the call is not considered “unanswered”.)
If the set receives a call from a number already on
the UNA list, the latest call is recorded and the earlier
call is dropped from the list. The set can be
configured to record unanswered calls for all lines,
designated lines, or no lines (Not Activated).
To enable unanswered call logging and select the
type of UNA to be used, follow these steps:
1.
OPTIONS
4 ENTER
If the following screen appears, the UNA feature is
disabled:
UNA SERVICE MODE
NON SUPPORTED
To leave it as is, press OPTIONS again.
Enabling the UNA
Feature