Filter
Top Products
5-14
5
NI / 5E Custom Terminal Installation
NI ONLY
This completes programming of FAs. If you
encounter problems accessing features, review
these items for accuracy and check with your service
provider.
Caution: If you manually reassign the CONF
button, conference may not work in all cases.
If you wish to reassign this button, talk to your
System Administrator or service provider.
Your NISDN terminal’s first button is set at the
factory as CA=1. If you subscribe to EKTS or Basic
ISDN on a DMS NI1, it is necessary to first clear the
CA setting. Then you can enter DNs.
1.
3 ENTER
CALL APPEARANCE MODE
SELECT ASSIGN KEY
The first button lower left, lights green. This is the
factory default CA=1.
2. Press multifunction button 1.
3.
CLEAR ENTER
CA=
COMPLETED
Now that you have cleared CA=1 from your first
call button, you are ready to program Directory
Numbers. If COMPLETED still appears on the
display, press keypad *, 9, ENTER (softkey 1), 3,
ENTER.
This screen appears:
DIRECTORY NUMBER MODE
SELECT ASSIGN KEY
Selection 3:
Directory
Number