3-13
3
Using the NI / 5E Custom Terminal Set-Up
ENABLING AND
DISABLING THE
SPEAKER
FUNCTION
4. You can then select a different menu function,
or press OPTIONS to return to the normal display.
This feature enables and disables the speakerphone
on the SRS-9924, and the listen-only function on
the SRS-9912.
1.
OPTIONS
5 ENTER
SPEAKER SERVICE MODE
SUPPORTED
2.
ENTER
1: SUPPORT 2: NO SUPPORT
(SELECT 1-2)
3. Press 1 or 2 to select your choice.
4. Press ENTER. This screen appears:
SUPPORTED
or
NO SUPPORT
COMPLETED
You can set up the Digital Set to use the handset,
the speaker <SRS-9924>, or a headset by selecting
from the following modes:
Enables use as a headset-only phone. You must
disconnect the handset from the jack on the phone’s
left side and plug the headset into the same jack.
Calls are connected and disconnected only by your
pressing the SPKR button. In headset mode, the
handsfree mode, including the speaker/
microphone, is not supported.
Enables normal use as a handset phone. While in
this mode, the speaker can be enabled or disabled
as follows:
Allows speaker use, controlled by SPKR button.
<SRS-9924>
HANDSFREE,
HANDSET, AND
HEADSET MODES
Headset Mode
Handset Mode
Handsfree
Supported